Search This Blog Post

Samsung Galaxy S3 (GT-I9300) Test Firmware Collection

Samsung Galaxy S3 (GT-I9300) Test Firmware Collection


Model: GT-I9300
Country: Germany (Vodafone)
Version: Android 4.3
Changelist: 1902166
Build date: Sat, 26 Oct 2013 12:24:03 +0000
Product Code: VFG
PDA: I9300XXUGMJ9
CSC: I9300VFGGMJ5
MODEM: I9300BUUGMJ3
Download: I9300XXUGMJ9_I9300VFGGMJ5_I9300BUUGMJ3_VFG.zip

NOTE
- This firmware will WIPE your device (Perform a backup before flashing)
- This test firmware will NOT increase your binary counter NOR void your warranty.
- This test firmware is a pre-release firmware and not official from Samsung.
- We have fully tested this firmware and this firmware works perfectly as any other official firmware.

Instructions For Flashing Firmware:
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From here or here)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md 5 to AP
- Add BL_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md 5 to BL
- Add MODEM_I9300BUUGMJ3_REV02_REV04_CL1413323.tar.md5 to CP
- Add CSC_VFG_I9300VFGGMJ5_1986192_REV00_user_low_ship.t ar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!

Screenshots:

No comments:

Post a Comment

All Software Here Headline Animator

Please Log in